World RRP: £54.99
Category: BASS TUBES
Product code: BASS8.1
Now shipping Version 2 of this product - With a bigger surround for increased bass extension and increased power handling the new BASS8.1 is a product born out of the need for an inexpensive, compact, great sounding passive woofer. For those with a little less space or limited on amplifier budget that still desire more bass than a speaker system alone can provide. The answer is a small, high output bass tube. The high sensitivity means it can be run well from a 2 or 4 channel amplifier bridged, no expensive mono amp is required here. It doesn’t need a lot of power to get it moving and it doesn’t take up a lot of space to get it installed. But it does fill the car with rich and punchy bass tones. The ratio of bass to size is excellent for the small form factor of this product.
Prototype – This product was prototyped close the start of Bassface brand inception. Following very successful trials we decided they would be strong enough for the market they were intended for.
V1 – The first batch looked very similar but had a much thinner grey surround which limited the woofer excursion.
V2 – The current version features an improved subwoofer with increased power handling as well as bigger surround for better bass extension.
V2.1 – V2.1 models are identical to V2 models except they are packed in an attractive glossy outer carton (Delivered to warehouse late Q2 2017 but with some stock crossover)
|Product Net Weight (g) (For Pairs/Sets Weight Is All Major Parts)
|Product Length (mm)
|Complete Product Pack Weight (g)
|Retail Carton L (mm)
|Retail Carton W (mm)
|Retail Carton H (mm)
|Speaker Maximum Recommended Power (Watts) (One Speaker, Using Appropriate Crossover)
|Speaker Power Handling RMS (Watts) (One Speaker, Using Appropriate Crossover)
|Overall Diameter (mm)
|Impedance (Ohm) (Nominal)
|Recommended Bass Enclosure Tuning Frequncy (Hz)
||Pre Tuned to 30Hz
- Double Stitched High Roll Foam Surround
- Non Pressed Paper Stiff Lightweight Construction
- Compact Tube Design Enclosure
- Rear Firing Port for Extended Bass Response
- High Sensitivity for Maximum Compatibility
- Curved Box Reduces Internal Standing Wave Distortion
- Digitally Optimised Enclosure to Driver Matching
- Embroidered Logo Panel
- 1 x Compact 8" Tube Style Bass Enclosure with Pre-Fitted 210mm Subwoofer