DB1.4 1Ohm Class D Monoblock Subwoofer 12v Power Amplifier Complete Populated PCB Assembly 2730w V1

HAMMER

World RRP: £229.99

Category: Spare Parts

Product code: DB1.4PCBA

Product description

Bassface is proud to announce that it will now ship replacement PCB units for its amplifiers to help customers repair and renew existing equipment. Ideal for competitors trying to keep costs down after pushing beyond limits or for more traditional repairs. With the cost of raw materials increasing every year it does not make economic sense for business to encourge customers to throw away perfectly good cast and machined components. Here we have the DB1.4PCBA, a complete PCB unit ready for assembly into your broken V1 DB1.4.

No prototype necessary. Straight iteration of existing product. Note that the unit does not ship with Remote Control.

Product Category Spare Parts
Version 1
Series Hammer
Barcode 680044771908
Production Status Current
Product Height (mm) 40
Product Length (mm) 560
Product Width (mm) 165
Complete Product Pack Weight (g) 1300
Warranty (Months) 12
Sold As Single

Genuine Useable RMS Power, 4Ohm Bridge (Watts), < 1%THD, 14v 1120x1
Genuine Useable RMS Power, 2Ohm Bridge (Watts), < 1%THD, 14v 1870x1
Genuine Useable RMS Power, 1Ohm Bridge (Watts), < 1%THD, 14v 2730x1
Frequency Response (Hz) 10-1000
THD Continuous 4 Ohm 1Khz/100Hz (%) <0.1
Signal To Noise Ratio (db) >96
LPF (Hz) 40-180
Bass Boost (Db) 0-12
Boost Frequency (Hz) 30-80
Subsonic Filter (Hz) 0-50
Audio Signal Input Voltage (V) 0.2-8
LPF Slope (Db/Oct) 12
Subsonic Filter Slope (Db/Oct) 12
Amplifier Topology Class D
Amplifier Strappable? Not Recommended - No Warranty 2Ohm
Fuse Rating (Amps) 280
Recommended Wiring Kit and Accessories PWK0.1 RCA5.1
Minimum Recommend Final Load Per Channel (Ohms) 1

Verified RMS 14.4V Per Channel 4Ohm (Watts)@(THD), (Amps), (Version) 1114@1%, 94.4(V1)
Verified RMS 14.4V Per Channel 2Ohm (Watts)@(THD), (Amps), (Version) 1864@1%, 165.8(V1)
Verified RMS 14.4V Per Channel 1Ohm (Watts)@(THD), (Amps), (Version) 2722@3%, 279.1(V1)
Verified RMS 13.8V Per Channel 4Ohm (Watts)@(THD), (Amps), (Version) 1056@1%, 89.1(V1)
Verified RMS 13.8V Per Channel 2Ohm (Watts)@(THD), (Amps), (Version) 1776@1%, 158.6(V1)
Verified RMS 13.8V Per Channel 1Ohm (Watts)@(THD), (Amps), (Version) 2456@3%, 264.3(V1)
Verified RMS 12.5V Per Channel 4Ohm (Watts)@(THD), (Amps), (Version) 907@1%, 83.8(V1)
Verified RMS 12.5V Per Channel 2Ohm (Watts)@(THD), (Amps), (Version) 1459@1%, 143.4(V1)
Verified RMS 12.5V Per Channel 1Ohm (Watts)@(THD), (Amps), (Version) 2078@3%, 243.2(V1)

  • Complete Replacement PCB Assembly
  • Bigger Version Of Our Contest Winning Mono Amplifier
  • Incredible Power - Fantastic Value Per Watt
  • Highly Efficient Class D Topology
  • Load Optimised for Transient Stability at Low Impedance's
  • T.D.O.S. Amplifier Protection Circuitry
  • O.P.S. Oversized Power Supply
  • Up To 8V Ready Pre Amp Input Stage
  • Low THD Audiophile Components
  • Variable Phase 0-180 Degrees
  • Variable Subsonic Filter
  • Variable Bass Boost
  • Variable Low Pass Crossover

  • 1 x High Performance Mono Amplifier Populated PCB

Downloads

Contact us about this product

If you have any questions about this product, complete the form below and we’ll get back to you as soon as we can.

Fields marked with an * are mandatory