SPL4C.1 4" Inch 10cm 4OhmComponent Speaker & Tweeter Kit 300w RMS


World RRP: £84.99

Category: Coaxial & Component Speakers

Product code: SPL4C.1

Product description

The SPL4C.1 was the next logical progression in the Bassface SPL component speaker family. Sharing common components with its larger counterparts it has a white woven composite cone with excellent stiffness for great midrange and bass response, a silk dome tweeter with a plethora of fitment hardware along with an advanced crossover network whose characteristics have been perfectly matched to the drivers. This combination delivers clear and accurate sound reproduction and good power handling for such a small driver especially when used with a suitable high pass filter and a subwoofer. The back plate is vented to keep the VC compression and temperature down, increasing power handling. The silk dome tweeters are small enough to fit in place of existing ones in your system or to be installed discreetly. The mounting hardware enables you to mount them flush in the dash, on the dash, angled on the dash or even in the doors or headlining. When installed properly into a suitable panel these speakers will instantly improve a factory sound system, revealing the full spectrum of sound that OEM speakers simply cannot reproduce. Team them up with a decent amplifier to experience best resolution and detail – SPL4C.1 might be small but when used correctly they will still produce convincing results with rich smooth midrange and sparkling accurate highs.

We built these to cater for those with like elegant style, excellent performance and great value, married with Superb sound and only a 4″ speaker hole in their vehicle. They do that wonderfully with no prototype even made as we just piggy backed existing product specs we had. V1 – The V1 is the first production version.

Product Category Coaxial & Component Speakers
Version 1
Series Classic
Barcode 617529407274
Production Status Current
Product Net Weight (g) (For Pairs/Sets Weight Is All Major Parts) 1800
Complete Product Pack Weight (g) 2170
Retail Carton L (mm) 350
Retail Carton W (mm) 290
Retail Carton H (mm) 80
Warranty (Months) 12
Sold As Kit

Recommended Cable PSC18.1
Overall Depth (mm) 31
Mounting Depth (mm) 16
Front Protrusion From Mounting Plane (mm) 15
Overall Diameter (mm) 56
Installation Cutout Diameter (mm) 40
System Maximum Power (Watts) (Using Pair Of Tweeters Not Necessarily Included) 200
System RMS (Watts) (Using Pair Of Tweeters Not Necessarily Included) 100
Frequency Response (Hz) 2500-23000
Impedance (Ohm) 4
Sensitivity (db/1Wm) 98

Speaker Maximum Recommended Power (Watts) (One Speaker, Using Appropriate Crossover) 200
Speaker Power Handling RMS (Watts) (One Speaker, Using Appropriate Crossover) 100
Overall Diameter With Lugs (mm) 125
Overall Diameter With Grilles (mm) 140
Overall Diameter (mm) 100
Magnet Diameter (mm) (Including Magnet Protector Where Applicable) 75
Installation Cutout Diameter (mm) 90
Grille Depth (mm) 20
Overall Depth (mm) 48
Mounting Depth (mm) 45
Front Protrusion From Mounting Plane (mm) 3
System Frequency Response (Hz) (Indicative Of Usable Range But Not Suitability) 53-23000
Impedance (Ohm) (Nominal) 4
Sensitivity (db/1Wm) 95
Recommended Cable PSC16.2

Full Speaker System Recommended Peak Power Input (Watts) (Using Pair/Full Set Of Speakers Not Necessarily Included & Appropriate Crossover) 600
Full Speaker System Power Handling RMS (Watts) (Using Pair/Full Set Of Speakers Not Necessarily Included & Appropriate Crossover) 300

  • Tech-One White Woven Composite Cone
  • Heavy Gauge Steel Basket
  • Massive Super High Density Ceramic Magnet
  • Multi Layer Aluminium Voice Coil
  • Aerospace Grade Rubber Surround Suspension
  • Highly Musical Silk Dome Tweeter
  • Sibilance Free Bar Type Tweeter Dome Protection
  • 3 Position Tweeter Level Switch -3db / 0db / +3db

  • 2 x 4" Mid Bass Drivers
  • 2 x Crossover Unis
  • 2 x 0.75" Silk Dome Tweeters
  • 2 x Tweeter Surface Mounts
  • 2 x Tweeter Flush Mounts
  • Screw Pack With Mounting Hardware
  • 4 x 1m Lengths of Wire With Spade Terminals on 1 End
  • 2 x 3m lengths of Basic Speaker Wire


Contact us about this product

If you have any questions about this product, complete the form below and we’ll get back to you as soon as we can.

Fields marked with an * are mandatory