SPL6C.3 6.5" Inch 16.5cm 4Ohm Component Speaker & Tweeter Kit 400w RMS


World RRP: £87.99

Category: Coaxial & Component Speakers

Product code: SPL6C.3

Product description

SPL6C.3 is a complete component kit, in 6.5/165mm size, but with a difference. The difference is that we have engineered these speakers to offer premium performance at a very tiny price. Using featherweight fibre reinforced paper cones hooked to enormous 110mm (!) high density ceramic magnets via a beefy 37mm voice coil these offer absolutely stunning detail and sonic accuracy. We have also specified large 25mm high end silk dome tweeters to complete the system. The surround is also big news, with a PA/Pro Audio style double style fabric design that doesn't colour the sound and assists in keeping the cone exactly central to the VC. We have, without shame, saved money on simple pressed baskets and a basic crossover shrouded in just heat shrink. We also saved money by not supplying you with any cable or grilles for the mids. The simple crossover does surprisingly well with the natural impedence rise of the mids rolling them off nicely - a lovely open, detailled sound with excellent cohesion between the system. On test, used active with an 80Hz high pass on the mids, 4500Hz low pass crossover at 12db/octave and then 4500Hz high pass on the tweeters at 18db/octave we were able to achieve sound quality that rivals the best we have ever heard, powered off a V2 DB2.2 with a V2 SPL15.2 for lows, in a sealed enclosure run from a DB1.3 - obviously this was an SQ setup but truly the sound was epic from that point of view. Also worthy of note is the slim mounting depth (for the performance) of just 53mm (although given that the woofer is vented out the back we would advise at least 10mm of additional clearance if possible.

Prototype was created in response to European demand for a high end but eminently affordable component speaker at six point five inch size. One of our factories has invested heavily in testing facilities and this is beginning to pay dividends since the engineering team are able to audition the products on site and make small changes even before customer facing samples are sent to us in the UK. Construction of the first batch was completed Q3 2017 with a bit of a wait until shipment was available and the first customer deliveries were made in early Q1 2018.

Product Category Coaxial & Component Speakers
Version 1
Series Classic
Barcode 683422302114
Production Status Current
Product Net Weight (g) (For Pairs/Sets Weight Is All Major Parts) 3250
Complete Product Pack Weight (g) 3430
Retail Carton L (mm) 415
Retail Carton W (mm) 180
Retail Carton H (mm) 68
Warranty (Months) 12
Sold As Kit

Recommended Cable PSC18.1
Voice Coil Diameter (mm) 25
Overall Depth (mm) 29
Mounting Depth (mm) 14
Front Protrusion From Mounting Plane (mm) 15
Overall Diameter (mm) 59
Magnet Diameter (mm) 30
Installation Cutout Diameter (mm) 50
System Maximum Power (Watts) (Using Pair Of Tweeters Not Necessarily Included) 400
System RMS (Watts) (Using Pair Of Tweeters Not Necessarily Included) 200
System Maximum Power (Watts) (Single Tweeter) 200
System RMS (Watts) (Single Tweeter) 100
Frequency Response (Hz) 4000-22000
Impedance (Ohm) 4
Sensitivity (db/1Wm) 105

Speaker Maximum Recommended Power (Watts) (One Speaker, Using Appropriate Crossover) 200
Speaker Power Handling RMS (Watts) (One Speaker, Using Appropriate Crossover) 100
Overall Diameter (mm) 167
Pitch Circle Diameter (mm) 158
Magnet Diameter (mm) (Including Magnet Protector Where Applicable) 110
Installation Cutout Diameter (mm) 140
Grille Depth (mm) Not Supplied
Overall Depth (mm) 58
Mounting Depth (mm) 53
Front Protrusion From Mounting Plane (mm) 5
System Frequency Response (Hz) (Indicative Of Usable Range But Not Suitability) 40-22000
Impedance (Ohm) (Nominal) 4
Sensitivity (db/1Wm) 105
Recommended Cable PSC12.2
Voice Coil Diameter (mm) 37

Full Speaker System Recommended Peak Power Input (Watts) (Using Pair/Full Set Of Speakers Not Necessarily Included & Appropriate Crossover) 800
Full Speaker System Power Handling RMS (Watts) (Using Pair/Full Set Of Speakers Not Necessarily Included & Appropriate Crossover) 400

  • High End Fibre Reinforced Paper Cone Midranges
  • High End Silk Dome Tweeters
  • Extreme Magnet And Lightweight Cone For Incredible Sensitivity
  • Compact Mounting Depth
  • Supplied Without Speaker Cable Or Midrange Grilles

Length (mm) 80
Height (mm) 15
Width (mm) 23
Cable Length (m) .27

  • 2 x 6.5" Mid Bass Drivers
  • 2 x Crossover Unis
  • 2 x 1" Silk Dome Tweeters
  • 2 x Tweeter Surface Mounts
  • 2 x Packs Of Mounting Screws And Spire Nuts


Contact us about this product

If you have any questions about this product, complete the form below and we’ll get back to you as soon as we can.

Fields marked with an * are mandatory