XDB1.1FR 1Ohm Class D Monoblock Full Range 12v Power Amplifier 2500w RMS


World RRP: £399.99


Product code: XDB1.1FR

Product description

Bassface is an international brand. That means that we have a sense of the trends within our field in a very broad sense. At the moment, in the Americas and some of Europe there is a huge excitement around building big, powerful amplifiers that use a Class D architecture but that are set to run full range. They are being used to drive all manner of incredible and wonderful speaker systems that are often crafted in a very exciting way. We wanted to be part of this and so we are proud to introduce to you the XDB1.1FR. This amplifier has an advanced double sided PCB with a circuit drawn by one of the most respected designers in the industry and the amplfier has a compelling set of performance credentials. The ability to run loads down as low as 1 ohm conservatively is of course the main party trick, but one could just as easily use the XDB1.1FR throttled back on a more modest load to create a system with huge reserves of power and headroom. XDB1.1FR also debuts a brand new remote control that has voltage, temperature display and a clip light along with its bass level control. On the connections we have huge, high quality insulated terminals with a useful remote out to drive other amps. Every bit of the build of this amp is top quality and truly the XDB1.1FR hearalds the beginning of a new generation of products from Bassface.

As a spin off from the Q2 meeting with our Chinese engineers the XDB1.1FR project was actually easier than we expected because the design was a clean sheet affair. The V1 amplifier has exceeded expectations right away and was delivered to our warehouse Q3 2017, in excellent time and customer deliveries will begin right away. V1.1 - Production models have had their safe impedance for customer use altered to 1 ohm after testing, for safety. Performance at 1 ohm is outstanding with almost 2500WRMS at only 1% distortion.

Product Category Amplifiers
Version 1
Series Hammer
Barcode 683422302107
Product Net Weight (g) (For Pairs/Sets Weight Is All Major Parts) 5935
Product Height (mm) 65
Product Length (mm) 420
Product Width (mm) 255
Complete Product Pack Weight (g) 6731
Retail Carton L (mm) 530
Retail Carton W (mm) 300
Retail Carton H (mm) 110
Warranty (Months) 12
Sold As Single

Quoted Maximum Unfused Power, No THD Limit (Watts) 5000
Quoted Maximum Unfused RMS, No THD Limit (Watts) 2500
Quoted RMS Per Channel 4Ohm, No THD Limit (Watts) 1000
Quoted RMS Per Channel 2Ohm, No THD Limit (Watts) 1500
Quoted RMS Per Channel 1Ohm, No THD Limit (Watts) 2500
Verified RMS 14.4V Per Channel 4Ohm (Watts)@(THD), (Amps), (Version) 829@1%,66.8(V1)
Verified RMS 14.4V Per Channel 2Ohm (Watts)@(THD), (Amps), (Version) 1561@1%,137.2(V1)
Verified RMS 14.4V Per Channel 1Ohm (Watts)@(THD), (Amps), (Version) 2467@1%,110.3(V1)
Verified RMS 13.8V Per Channel 4Ohm (Watts)@(THD), (Amps), (Version) 831@1%,67.6(V1)
Verified RMS 13.8V Per Channel 2Ohm (Watts)@(THD), (Amps), (Version) 1460@1%,128.8(V1)
Verified RMS 13.8V Per Channel 1Ohm (Watts)@(THD), (Amps), (Version) 2229@1%,220.9(V1)
Verified RMS 12.5V Per Channel 4Ohm (Watts)@(THD), (Amps), (Version) 754@1%,66.7(V1)
Verified RMS 12.5V Per Channel 2Ohm (Watts)@(THD), (Amps), (Version) 1224@1%,117.7(V1)
Verified RMS 12.5V Per Channel 1Ohm (Watts)@(THD), (Amps), (Version) 1835@1%,199.1(V1)
Frequency Response (Hz) 10-10000
Signal To Noise Ratio (db) >95
LPF (Hz) 35-10000
HPF (Hz) 10-1000
Bass Boost (Db) 0-9
Audio Signal Input Voltage (V) 0.2-6
LPF Slope (Db/Oct) 12
HPF Slope (Db/Oct) 12
Amplifier Topology Class D
Amplifier Strappable? Not Recommended - No Warranty No
Fuse Rating (Amps) 280
Recommended Wiring Kit and Accessories PWK0.1 RCA5.1
Minimum Recommend Final Load Per Channel (Ohms) 0.5

  • Bespoke Full Range Class D Mono Amplifier
  • Incredible Power - Fantastic Value Per Watt
  • Remote control with voltage and temperature display and clip light
  • Highly Efficient Class D Topology
  • Load Optimised for Transient Stability at Low Impedance's
  • T.D.O.S. Amplifier Protection Circuitry
  • O.P.S. Oversized Power Supply
  • Up To 6V Ready Pre Amp Input Stage
  • Low THD Audiophile Components
  • Variable Phase 0-180 Degrees
  • High Density Cast Aluminium Heatsink Body
  • Thermally Efficient Heatsink Coating
  • Variable Bass Boost
  • Variable Crossover
  • Remote Out Feed

  • 1 x High Performance Mono Amplifier
  • 1 x Bass remote level control
  • 1 x 5m level control cable
  • 1 x Accessory Pack


Contact us about this product

If you have any questions about this product, complete the form below and we’ll get back to you as soon as we can.

Fields marked with an * are mandatory