DB2.1s 2/1 Channel Bridgeable Stereo 12v Power Amplifier 540w Verified RMS Power Output

ASSAULT

World RRP: £149.99

Category: AMPLIFIERS

Product code: DB2.1s

Product description

The "ordinary" DB2.1 has been evolved into a great sounding and reliable little amplifier but there exists a gap between it and the monsterous DB2.2 which this fantastic new product fills squarely. With 50% more power than the standard DB2.1 the DB2.1s has enough grunt to run big component speakers with ease or even a decent sized subwoofer with authority. The DB2.1s still maintains a compact footprint, relative lightweight and excellent efficiency but the output is much more beefy than its smaller brother. Upgrades that have taken time to bring to the earlier models are applied right away to this "s" model - including professional type cable connection blocks, rounded feet, cushioned backplate and higher density casting.

V1 – The DB2.1s uses all of the refinements present in the V5 DB2.1 but with 50% more output. The heatsink is slightly larger and is made from denser material to absorb the extra heat. Released to market on time, Q3 2017. Note that shipments leaving our warehouse prior to 08/02/18 have the wrong barcode on the outer packing. Barcode should be: 683422302077. This will be corrected in the V2 order.

Product Category Amplifiers
Version 1
Series Assault
Barcode 683422302077
Production Status Current
Product Net Weight (g) (For Pairs/Sets Weight Is All Major Parts) 2960
Product Height (mm) 62
Product Length (mm) 320
Product Width (mm) 242
Complete Product Pack Weight (g) 3352
Retail Carton L (mm) 380
Retail Carton W (mm) 285
Retail Carton H (mm) 100
Warranty (Months) 12
Sold As Single

Genuine Useable RMS Power, 4Ohm (Watts), < 1%THD, 14v 190x2
Genuine Useable RMS Power, 2Ohm (Watts), < 1%THD, 14v 270x2
Genuine Useable RMS Power, 4Ohm Bridge (Watts), < 1%THD, 14v 540x1
Frequency Response (Hz) 10-30000
THD Continuous 4 Ohm 1Khz/100Hz (%) <0.05
Signal To Noise Ratio (db) >97
LPF (Hz) 50-250
HPF (Hz) 80-1200
Bass Boost (Db) 0-12
Boost Frequency (Hz) 40
Subsonic Filter (Hz) 20-50
Audio Signal Input Voltage (V) 0.2-6
LPF Slope (Db/Oct) 12
HPF Slope (Db/Oct) 12
Subsonic Filter Slope (Db/Oct) 12
Amplifier Topology Class A/B
Fuse Rating (Amps) 2x35
Power Wire Input Gauge (AWG) 8
Recommended Wiring Kit and Accessories PWK8.1 RCA5.1
Minimum Recommend Final Load Per Channel (Ohms) 2

Verified RMS 14.4V Per Channel 4Ohm (Watts)@(THD), (Amps), (Version) 182@1%,40.8(V1)
Verified RMS 14.4V Per Channel 2Ohm (Watts)@(THD), (Amps), (Version) 268@1%,68.5(V1)
Verified RMS 14.4V Bridge 4Ohm (Watts)@(THD), (Amps), (Version) 535@1%,67.1(V1)
Verified RMS 13.8V Per Channel 4Ohm (Watts)@(THD), (Amps), (Version) 167@1%,37.4(V1)
Verified RMS 13.8V Per Channel 2Ohm (Watts)@(THD), (Amps), (Version) 252@1%,65.5(V1)
Verified RMS 13.8V Bridge 4Ohm (Watts)@(THD), (Amps), (Version) 498@1%,66.5 (V1)
Verified RMS 12.5V Per Channel 4Ohm (Watts)@(THD), (Amps), (Version) 137@1%,34.6(V1)
Verified RMS 12.5V Per Channel 2Ohm (Watts)@(THD), (Amps), (Version) 205@1%,59.9(V1)
Verified RMS 12.5V Bridge 4Ohm (Watts)@(THD), (Amps), (Version) 405@1%,60.2 (V1)

  • Class AB Amplifier
  • K3 Logic Circuit Super Wide 10hz-30khz Range
  • T.D.O.S. Amplifier Protection Circuitry
  • O.P.S. Oversized Power Supply
  • Up To 6V Ready Pre Amp Input Stage
  • Low THD Audiophile Components
  • Cast Aluminium Heatsink Body with rounded edges
  • Thermally Efficient Heatsink Coating
  • Variable Low-Pass Crossover
  • Variable High-Pass Crossover
  • Adjustable Sub Sonic Filter
  • Line Output For Daisy Chain Amplifier Applications
  • Variable Bass Boost Control

  • 1 x High Power 2 Channel Amplifier
  • 4 x Self tapping screws
  • 2 x Spare 35A fuses

Downloads

Contact us about this product

If you have any questions about this product, complete the form below and we’ll get back to you as soon as we can.

Fields marked with an * are mandatory