DSP8.1 Multi Channel DSP, Crossover & EQ With PC Software Control

CLASSIC

World RRP: £349.99

Category: AMPLIFIERS

Product code: DSP8.1

Product description

Boasting 8 output channels on RCA and 6 input channels via either High Level or RCA input as well as Optical Fibre input the DSP8.1 is an absolute processing genius. Controlled by PC software the unit offers a full 31 band EQ, both graphic and parametric. This features adjustable Q factor and gain of + and - 12db in steps of just 1 Hz! The Crossover module has adjustable elbows - you can select Butterworth, Linkwitz-Riley or Bessel curves along with slopes from 12db to an astonishing 48db "brick wall" style crossover in steps of 6db! Time delay on every channel is adjustable, also, along with phase. There is an output level adjustment for every channel to prevent input clip, an adjustable noise gate and full input and output gain adjustment also. Finally the unit has a wired remote unit to select the 6 audio presets and adjust level. Along with all of this, the specificaton of the unit is very high, with an incredible set of numbers such as a Signal to Noise ratio in excess of 110db, THD of less than 0.002 % and possible pre out level of up to 13V! Truly we are seeing a digital product here for a digital age.

Prototype - several built and tested 2016. Software was comprehensive but complicated. In Q4 2016 Julian flew to Italy and tested the original factory offered version with Bassface Italia's chief Gianluca Giordano and together they identified areas for improvement. New version designed and built with simpler software and more advanced on chip design, lower component count. Note that the production version of the DSP8.1 does not have bluetooth connectivity as testing had revealed a poor range and intermittant connection issues.

Product Category Amplifiers
Version 1
Series Classic
Barcode 683422298110
Product Net Weight (g) (For Pairs/Sets Weight Is All Major Parts) 1120
Product Height (mm) 205
Product Length (mm) 120
Product Width (mm) 36
Complete Product Pack Weight (g) 1760
Retail Carton L (mm) 280
Retail Carton W (mm) 200
Retail Carton H (mm) 85
Warranty (Months) 12
Sold As Single

  • High Quality Metal Chassis
  • PC Software Controlled With Incredible Adjustments
  • Phenomenal Specification, Dynamic Range and Signal To Noise Ratio
  • Remote Control Included
  • High And Low Level Input
  • Built In 31 Band EQ & Parametric EQ With 20Hz > 20Khz Range, 1Hz Resolution. Adjustable Q Factor From 0.404>28.85, 0.01 Resolution. Gain Adjustable From -12db > +12db
  • Built In Crossover With Selectable Curve Types: Butterworth, Linkwitz-Riley, Bessel. Adjustable Slope From 6db > 48db (!) In 6db Divisions. Resolution To 1Hz.
  • Output Phase Either 0 or 180 Degree Each Channel And Time Delay Adjustments From 0 to 20ms Or 0 to 692cm (0 to 272.75inch)
  • Amplitude Limiter With Adjustable Clip Level (CLOSE, 0.070Vpp > 8.658Vpp), Adjustable Response Time (0.3ms > 200ms), Adjustable Release Time (50ms > 5000ms
  • Input Noise Gate With Range CLOSE , -119dBu > -20dBu
  • 6 Adjustable Presets
  • Input And Output Gain Adjustments
  • Dynamic Range > 114db
  • S/N Ratio >110db
  • THD < 0.002%
  • Frequency Response 10Hz > 33000 Khz
  • Input Impedance 20K Ohms
  • Output Impedance 47 Ohms
  • Max RCA Input Voltage 6.5V, Max High Level Input 30V
  • Power Supply DC9 > 15V
  • Auto Turn On
  • Standby Power Consumption < 0.1W

  • 1 x 8 Channel DSP Unit
  • 1 x Remote Control Unit
  • 1 x 5m Remote Cable
  • 1 x Screw Pack
  • 1 x Wiring Harness (Non-ISO)

Downloads

Contact us about this product

If you have any questions about this product, complete the form below and we’ll get back to you as soon as we can.

Fields marked with an * are mandatory