Close search
  • Home
  • Our Range
  • About Us
  • Distributors
  • Get in touch
Go to description
Go to description
Go to description
Go to description
Go to description
Go to description
Go to description

GT Audio GT-MB6/4 6.5" 16.5cm 4Ohm 80w RMS Component Midbass Speaker


World RRP: £20.95

Category: Midbass & Midrange Speakers

Product code: GT-MB6/4

The GT Audio MB series is designed to offer the enthusiast a highly affordable entry point to component oriented audio - the MB6/4 being a 166mm chassis (145mm hole cutout) unit that plays like a champ right the way from below 100Hz up to 5kHz! The speaker is aimed at midbass applications, but can absolutely be used as a part of a full range setup with a tweeter, even without equalisation. Of course, the installer has to provide the right environment in terms of chassis location/baffle and lay on some clean, well crossed over power but given those points we are sure that the MB series will impress.

Technical Highlights


  • 165mm / 6.5" High Performance 80W RMS Midbass Driver
  • Lightweight ABS Cone & Nitrile Rubber Surround
  • 1" Coated CCA Wire, Kapton Voice Coil & Linear, Medium Compliance Single Spider
  • High Strength Y25 Motor With 100x18mm Magnet
  • Carefully Selected Stamped Steel Basket
  • Full Documentation To Assist With Projects
Technical Highlights

Series


GT Audio

What's In The Box?


What's In The Box?
  • 1 x Midbass Speaker
  • 1 x Data Sheet
  • 1 x GT AUDIO Sticker

Key Facts


Product Category Midbass & Midrange Speakers
Version 1
Series GT Audio
First Added 12/06/2023
Last Modified 25/01/2024
Barcode 5060905111480
Production Status Current
Product Net Weight (g) (For Pairs/Sets/Major Parts) 1300
Product Height (mm) 82
Product Length (mm) 166
Product Width (mm) 166
Complete Product Pack Weight (g) 1500
Operating Temperature (Degrees Celsius) 0-50
Warranty (Months) - Private Enjoyment Use Only 12
Sold As Single

Speaker Data


Speaker Maximum Burst Power (Watts) (One Speaker, Using Appropriate Crossover) 160
Continuous RMS Power (Watts) (One Speaker, Using Appropriate Crossover & 0%THD) 80
Overall Diameter (mm) 166
Magnet Diameter (mm) (Including Magnet Protector Where Applicable) 100
Installation Cut-Out Diameter (mm) 145
Overall Depth (mm) 82
Mounting Depth (mm) 73
Front Protrusion From Mounting Plane (mm) 9
System Frequency Response (Hz) 70>1000
Impedance (Ohm) (Nominal) 4
Sensitivity (db/1Wm) 88.11
Magnet Size (mm) 100x18
Magnet Type Y25
Magnet Qty 1
Voice Coil Former Spec Kapton
Voice Coil Type CCA Round Wire
Voice Coil Internal Diameter (mm) 25.9
Voice Coil Winding (Layers) 2
Cone Type ABS Plastic
Spider Compliance Medium
Spider Type Linear
Spider Design Single
Surround Single Roll
Surround Material Rubber
Tinsel Wire Single
Terminal Spade

Technical Parameters


Xmax Single Way Total (mm) 2.5