Close search
  • Home
  • Our Range
  • About Us
  • Distributors
  • Get in touch
Go to description
Go to description
Go to description
Go to description
Go to description
Go to description
Go to description

Indy EVO8/2 8" 20cm 2x2Ohm DVC Deep Bass Plus Subwoofer 750w RMS (Sealed/Ported Enclosures)


World RRP: £124.95

Category: SUBWOOFERS

Product code: IndyEVO8/2

We literally started with a blank sheet of paper and engineered everything to offer the best possible reliability and performance. Many prototypes, re-designs and modifications were made and a tremendous amount of reliability testing was undertaken in order to ensure outstanding longevity. Using a custom designed flat wire coil and high specification Y38 magnets the Indy EVO is something very special, delivering performance way beyond expectation. The spiders are tuned to each exact model allowing us to develop for excellent excursion and power handling while implementing measures to prevent coil rub. The motor venting has been carefully designed to offer a good balance between noise reduction and cooling efficiency. The build of the woofer also incorporates some measures to add additional durability for extreme use. The high roll surround was chosen to allow to peak excursion while maintaining good cone area. In normal use the surround will not be put to its maximum limits - this helps to improve longevity. The added bead of glue above and below the coil helps to prevent separation of the coil when used in extreme situations. Oversized 4 AWG terminals make for easy installation and allow easy use of multiple cables to the one terminal when running multiple woofer configurations. Safe for use in almost any enclosure - bandpass, vented or sealed. Not for use in free air/infinite baffle configuration. For keen enthusiasts this woofer offers good musicality whilst maintaining great power handling and surprisingly good deep bass performance. Indy EVO is the ultimate iteration of the Swiss Army Knife subwoofer. We also offer recone kits for competition use.

Technical Highlights


  • 750W Continuous RMS / 1500W Burp Power Handling
  • 2 Inch Dual 2 Ohm Flat Wire 8 Layer Voice Coil
  • Best In Ported Enclosures 0.75>2 CuFt
  • Progressive Medium Compliance 1x2 Spider Pack
  • Tall Smooth Foam Surround & Non Pressed Paper Cone
  • 2 x Extreme Y38 Magnets 145x20mm
Technical Highlights

Series


Indy

What's In The Box?


What's In The Box?
  • 1 x Subwoofer
  • 1 x Data Sheet
  • 1 x Box Design Manual
  • 1 x Indy EVO Sticker

Version History


IndyEVO concept was designed using the IndyS as a base point to offer an all-round Extreme performance woofer at a reasonable price point. The new engineering team drew up a list of specification points and made several prototypes before settling on the current configuration. From there detail changes were made to every aspect of the basic design focussing on each detail. Performance was optimised to allow the woofer to run well in almost any enclosure. The Indy EVO branding was originally conceived in mid-2019, with outline specifications in place by the end of that year. Prototypes were built throughout 2020 and first production models were made available Q3, 2021.

Key Facts


Product Category Subwoofers
Version 1
Series Indy
First Added 08/01/2020
Last Modified 25/01/2024
Barcode 5060905110698
Production Status Current
Product Net Weight (g) (For Pairs/Sets/Major Parts) 5500
Product Height (mm) 162
Product Length (mm) 215
Product Width (mm) 215
Complete Product Pack Weight (g) 6500
Operating Temperature (Degrees Celsius) 0-50
Warranty (Months) - Private Enjoyment Use Only 12
Sold As Single

Speaker Data


Speaker Maximum Burst Power (Watts) (One Speaker, Using Appropriate Crossover) 1500
Continuous RMS Power (Watts) (One Speaker, Using Appropriate Crossover & 0%THD) 750
Overall Diameter (mm) 215
Magnet Diameter (mm) (Including Magnet Protector Where Applicable) 145
Installation Cut-Out Diameter (mm) 185
Overall Depth (mm) 157
Mounting Depth (mm) 132
Front Protrusion From Mounting Plane (mm) 25
Recommended Frequency Range (Hz) 35>120
Impedance (Ohm) (Nominal) 2+2
Sensitivity (db/1Wm) 83.92
Total Magnet Weight (Oz) 90
Magnet Size (mm) 145*20
Magnet Type Y38
Magnet Qty 2
Top Plate thickness (mm) 10
Back Plate Thickness (mm) 8 + Bump
Optimum Bass Enclosure Type Ported
Recommended Bass Enclosure Volume (CuFt) 0.75-2
Recommended Bass Enclosure Tuning Frequency (Hz) 40
Voice Coil Former Spec Aluminium
Voice Coil Type CCA Flat Wire
Voice Coil External Diameter (mm) 54.8
Voice Coil Internal Diameter (mm) 50.8
Voice Coil Winding Height (mm) 28
Voice Coil Winding (Layers) 8
Cone Type Non Pressed Paper
Spider Compliance Medium
Spider Type Progressive
Spider Diameter (mm) 139
Spider Design 1x2
Surround Tall Smooth
Surround Material Foam
Tinsel Wire Double
Terminal Push