SPL12.2 12" Inch 30cm 2x2Ohm DVC Subwoofer 1250w RMS


World RRP: £142.99


Product code: SPL12.2.2

Product description

Now shipping Version 3 of this product - The latest DVC 2+2 ohm model of the venerable SPL12.2 features an improved voice coil cooling system, increased winding height, bigger bump in pole piece and integrated rubber gasket. the SPL12.2 is a highly developed all round sub with extremes of performance in every respect. Formidable power handling and SPL capabilities, coupled with great sound quality and response characteristics. This sub represents the culmination of years of experience and knowledge, with all the components carefully selected for power and reliability. The non pressed paper cone is lightweight and rigid and has a double stitched oversized surround offering terrifc excursion. The strong woven spider and tough coil former work with the three inch dual voice coil to create a powerful and lightweight motor structure and the insulated tinsel leads are “over under” woven through the spider, offering good performance at large excursions. The cast basket has a low surface area and still manages to be rigid. It also incorporates grilled vents for improved cooling to the VC. We believe that the SPL12.2 is the best speaker in it's class and that it out performs woofers from other brands costing twice as much.

Prototype – No prototype was necessary because the V1 2+2 is the same as the V3 4+4, but with the different coil. V1 - Introdued to complement the 4+4 version. TS Parameters for this model FS:63.13Hz, Sd: 46.38cm2, Mmd:248.91g, Mms:254.65g, BL:19.72T, Qms:7.89, Qes:1.04, Qts:0.92, SPL:84.5w/m, Vas:7.622L, EBP:60.70192308 V2 - Deeper and bigger bump in the T-yoke/back plate to enable longer excursion without slapping the plate. V3 - From assembly date Feb 2017 production of V3 incorporates improved bobbin glue. Outer packaging was also improved with double box and revised inner carton to prevent damage in transit. Deeper and bigger bump in the T-yoke/back plate to enable longer excursion without slapping the plate. Also this meant we could increase winding length safely on the VC +3mm.

Product Category Subwoofers
Version 3
Series Classic
Barcode 700175821621
Production Status Current
Product Net Weight (g) (For Pairs/Sets Weight Is All Major Parts) 7210
Complete Product Pack Weight (g) 7800
Retail Carton L (mm) 345
Retail Carton W (mm) 345
Retail Carton H (mm) 205
Warranty (Months) 12
Sold As Single

Speaker Maximum Recommended Power (Watts) (One Speaker, Using Appropriate Crossover) 2500
Speaker Power Handling RMS (Watts) (One Speaker, Using Appropriate Crossover) 1250
Overall Diameter (mm) 325
Magnet Diameter (mm) (Including Magnet Protector Where Applicable) 160
Installation Cutout Diameter (mm) 280
Overall Depth (mm) 175
Mounting Depth (mm) 145
Front Protrusion From Mounting Plane (mm) 30
Impedance (Ohm) (Nominal) 2+2
Sensitivity (db/1Wm) 89
Recommended Cable PSC10.1
Voice Coil Diameter (mm) 65

  • Designed for use in enclosures from 1.5 cubic feet (hard bass) up to 2.5 cubic feet (low bass)
  • Recommended Box – Ported 2 Cubic Feet Tuned to 35Hz
  • Super High Density Double Stacked Ceramic Magnets
  • Extreme Duty Non Pressed Paper Cone
  • Dual 2 Ohm BASV High TemPerature Voice Coils
  • CAD Optimised Low Compression VC Cooling System
  • Cast Aluminium Basket
  • Treated Oversize Double Stitched Foam Surround
  • Extra Large Dust-cap Assists Structurally
  • Quick Release Push Terminals

  • 1 x High Performance Dual Voice Coil Subwoofer

Revc (Ohm) 4
Fo (Hz) 63.13
Sd (Cm sq) 463.77
Md (g) 149
BL (T m) 19.722
Qms 7.885
Qes 1.039
Qts 0.918
No (%) 0.179
SPL (Db) 84.5
Vas (Ltr) 7.622
Cms (uM/N) 24.957
Krm (mOhm) 5.455
Erm 0.875
Mms (g) 254.648
MMd (g) 248.905
Kxm (mOhm) 33.213
Exm 0.732
Xmax (mm) 14.37
EBP 60.70192308


Contact us about this product

If you have any questions about this product, complete the form below and we’ll get back to you as soon as we can.

Fields marked with an * are mandatory