SPL5C.2 5.25" Inch 13cm 4Ohm Component Speaker & Tweeter Kit 350w RMS

CLASSIC

World RRP: £94.99

Category: Coaxial & Component Speakers

Product code: SPL5C.2

Product description

Now shipping Version 2 of this product - Bringing the 5.25" components up to the minute with the rest of the range these second generation component speakers are designed with the enthusiast in mind. Bristling with all the right tech to deliver outstanding audio performance, you are sure to experience excellent results when upgrading to the SPL5C.2. From savage mid bass punch through to blistering highs, a well installed set of SPL5C.2’s are sure to outperform your expectations with detail accuracy and natural sounding characteristics. Matched with a high power amplifier such as the DB4.1 and a subwoofer your car sound system will come to life, bringing you a full and rewarding sonic experience. Sporting a bigger magnet, stiffer cone and more advanced crossover than its predecessor, the SPL5C.2 will impress even the most discerning ear with its detail and cohesion. The kit is comprehensive and alongside the fitting instructions available on the Bassface website, you can be sure the support is there to help you get the best from your purchase quickly and easily.

Prototype – We wanted to replace the SPL5C.1 with an updated and upgraded successor. This is the SPL5C.2 with stiffer cones, higher power handling and better tweeter housing. V1 – No problems noted. V2 – Nothing changed but the wire included upgraded to a heavy gauge 16AWG suitable for this type of kit.

Product Category Coaxial & Component Speakers
Version 2
Series Classic
Barcode 617529407281
Product Net Weight (g) (For Pairs/Sets Weight Is All Major Parts) 2080
Complete Product Pack Weight (g) 2710
Retail Carton L (mm) 385
Retail Carton W (mm) 310
Retail Carton H (mm) 87
Warranty (Months) 12
Sold As Kit

Recommended Cable PSC18.1
Overall Depth (mm) 31
Mounting Depth (mm) 16
Front Protrusion From Mounting Plane (mm) 15
Overall Diameter (mm) 56
Installation Cutout Diameter (mm) 50
System Maximum Power (Watts) (Using Pair Of Tweeters Not Necessarily Included) 200
System RMS (Watts) (Using Pair Of Tweeters Not Necessarily Included) 100
Frequency Response (Hz) 2500-23000
Impedance (Ohm) 4
Sensitivity (db/1Wm) 98

Speaker Maximum Recommended Power (Watts) (One Speaker, Using Appropriate Crossover) 250
Speaker Maximum Recommended Power RMS (Watts) (One Speaker, Using Appropriate Crossover) 125
Overall Diameter With Lugs (mm) 150
Overall Diameter With Grilles (mm) 160
Overall Diameter (mm) 130
Magnet Diameter (mm) (Including Magnet Protector Where Applicable) 85
Installation Cutout Diameter (mm) 115
Grille Depth (mm) 20
Overall Depth (mm) 56
Mounting Depth (mm) 50
Front Protrusion From Mounting Plane (mm) 6
System Frequency Response (Hz) (Indicative Of Usable Range But Not Suitability) 45-23000
Impedance (Ohm) (Nominal) 4
Sensitivity (db/1Wm) 95
Recommended Cable PSC16.2
Voice Coil Diameter (mm) 25

Full Speaker System Recommended Maximum Power (Watts) (Using Pair/Full Set Of Speakers Not Necessarily Included & Appropriate Crossover) 700
Full Speaker System Recommended RMS (Watts) (Using Pair/Full Set Of Speakers Not Necessarily Included & Appropriate Crossover) 350

  • Tech-One White Woven Composite Cone
  • Heavy Gauge Steel Basket
  • Massive Super High Density Ceramic Magnet
  • Multi Layer Aluminium Voice Coil
  • Aerospace Grade Rubber Surround Suspension
  • Highly Musical Silk Dome Tweeter
  • 3 Position Tweeter Level Switch -3db / 0db / +3db

  • 2 x 5.25" Mid Bass Drivers
  • 2 x Crossover Unis
  • 2 x 0.75" Silk Dome Tweeters
  • 2 x Tweeter Surface Mounts
  • 2 x Tweeter Flush Mounts
  • Screw Pack With Mounting Hardware
  • 4 x 1m Lengths of Wire With Spade Terminals on 1 End
  • 2 x 3m lengths of Basic Speaker Wire

Downloads

Contact us about this product

If you have any questions about this product, complete the form below and we’ll get back to you as soon as we can.

Fields marked with an * are mandatory