Close search
  • Home
  • Our Range
  • About Us
  • Distributors
  • Get in touch
Go to description
Go to description
Go to description
Go to description
Go to description
Go to description
Go to description

BLACKSPL6C.1 6.5" 17cm 4Ohm Component Speaker & Tweeter Kit 450w RMS


World RRP: £105.95

Category: Coaxial & Component Speakers

Product code: BLACKSPL6C.1

Our BLACK series speakers are bursting with audiophile build specs. Large KSV voice coils and oversize magnets increases magnetic force. Cast Aluminium baskets with extensive cooling for the VC provides a significant reduction in power compression, this means they play louder for longer with more power. Power compression is often overlooked at the price of significantly reduced output when running at high power, due to increased resistance from head build up in the motor assembly. This also affords the BLACK series speakers a much more open and natural sound. We made the suspension as light weight as possible to retain amazing cone control. This gives the midrange units high sensitivity enabling them to be high effective across a broad spectrum of power amplifiers. The tweeters use Neodymium magnets and ferrofluid cooling. This gives them a slimmer profile without loss of control. The domes are 100% pure silk with translucent finish which looks almost as good as it sounds! These are designed from the bottom up to impress even the most discerning ear. We are confident that these will surpass your expectations for even high end audio products. The BLACKSPL5C.1 and BLACKSPL6C.1 both have higher power handling to thier Coaxial counterparts. With more advanced crossover networks allowing for different tweeter positions with a tweeter dip switch. Giving you -3db 0db and +3db notches. We also revised the components so only the best quality components make up the crossover, affording them more power handling an better frequency control.

Technical Highlights


  • Cast Aluminium Basket Reduces Mechanical Distortion
  • Oversize 1.5” Voice Coil For High Power Handling
  • High Power Crossover With Hi-Freq Attenuation Switch
  • Extra VC Cooling Vents Decrease Power Compression
  • Woven Black Fibre Cone Provides Superior Dynamics
  • Over-hung Non Fatiguing Rubber Surround
  • Rigid Large Dustcap Increases Cone Stiffness
  • Engineered For SQ OEM Location Install Use
  • Sibilance Minimising Tweeter Protection

Series


SUPPORT CREW

What's In The Box?


  • 2 x BLACKSPL6C.1 Midbass Speakers
  • 2 x BLACK Tweeter Units Including Housing
  • 2 x Crossover
  • 2 x 1m Cable for Midbass
  • 2 x 2m Cable
  • 1 x Hardware Pack
What's In The Box?

Version History


Prototype - Overseas testing of the intial design during almost the whole of 2015 resulted in the final product being delivered in Q2 2016. V1 - Performance from the black series speakers is absolutely excellent and the entire range is capable of partnering up with any of our high quality SQ amplifiers to produce amazing results. We noted that the black on silver printing of the sticker on the back of the unit is vunerable to damage very easily.

Key Facts


Product Category Coaxial & Component Speakers
Version 1
Series Support Crew
First Added 01/05/2015
Last Modified 02/09/2021
Barcode 683422297427
Production Status Discontinued
Product Net Weight (g) (For Pairs/Sets/Major Parts) 4000
Complete Product Pack Weight (g) 4700
Warranty (Months) - Private Enjoyment Use Only 12
Sold As Kit

Tweeter Data


Overall Depth (mm) 30
Mounting Depth (mm) 17
Front Protrusion From Mounting Plane (mm) 13
Overall Diameter (mm) 30
Installation Cut-out Diameter (mm) 50
Magnet Type Neodymium
System Maximum Power (Watts) (Using Pair Of Tweeters Not Necessarily Included) 300
System RMS (Watts) (Using Pair Of Tweeters Not Necessarily Included) 150
Frequency Response (Hz) 3500-23000
Impedance (Ohm) 4

Speaker Data


Speaker Maximum Burst Power (Watts) (One Speaker, Using Appropriate Crossover) 300
Speaker Power Handling RMS (Watts) (One Speaker, Using Appropriate Crossover) 150
Continuous RMS Power (Watts) (One Speaker, Using Appropriate Crossover & 0%THD) 120
Overall Diameter With Lugs (mm) 165
Overall Diameter With Grilles (mm) 180
Overall Diameter (mm) 165
Magnet Diameter (mm) (Including Magnet Protector Where Applicable) 105
Installation Cut-Out Diameter (mm) 145
Grille Depth (mm) 30
Overall Depth (mm) 81
Mounting Depth (mm) 72
Front Protrusion From Mounting Plane (mm) 9
System Frequency Response (Hz) 37-23000
Impedance (Ohm) (Nominal) 4
Sensitivity (db/1Wm) 97

System Power


Full System Power Handling RMS (Watts) (Using Pair/Full Set Of Speakers Not Necessarily Included & Appropriate Crossover) 450