Close search
  • Home
  • Our Range
  • About Us
  • Distributors
  • Get in touch
Go to description

DB1.3 1Ohm Class D Monoblock Subwoofer 12v Power Amplifier Complete Populated PCB Assembly 2130W V4.1


World RRP: £141.99

Category: Spare Parts

Product code: DB1.3PCBA

Bassface is proud to announce that it will now ship replacement PCB units for its amplifiers to help customers repair and renew existing equipment. Ideal for competitors trying to keep costs down after pushing beyond limits or for more traditional repairs. With the cost of raw materials increasing every year it does not make economic sense for business to encourage customers to throw away perfectly good cast and machined components. Please note that it is extremely important to understand the immense heat that this board will generate if it is not installed into its correct heatsink. YOU CAN NOT RUN THIS BOARD WITHOUT THE CORRECT ORIGINAL BASSFACE HEAT SINK. If you attempt to use this product without installing it into the heat sink the product will immediately destroy itself.

Technical Highlights


  • Complete Replacement PCB Assembly
  • Latest Version Of Our Contest Winning Mono Amplifier
  • Incredible Power - Fantastic Value Per Watt
  • Highly Efficient Class D Topology
  • Load Optimised for Transient Stability at Low Impedance's
  • Strppable to 2 Ohm
  • O.P.S. Oversized Power Supply
  • Up To 6V Ready Pre Amp Input Stage
  • Low THD Audiophile Components
  • Variable Phase 0-180 Degrees
  • Variable Subsonic Filter
  • Variable Bass Boost
  • Variable Low Pass Crossover

Series


SUPPORT CREW

What's In The Box?


  • 1 x High Performance Mono Amplifier Populated PCB
What's In The Box?

Version History


No prototype necessary. Straight iteration of existing product.

Key Facts


Product Category Spare Parts
Version 1
Series Support Crew
First Added 17/11/2018
Last Modified 02/09/2021
Barcode 680044773360
Production Status Discontinued
Product Net Weight (g) (For Pairs/Sets/Major Parts) 1540
Product Height (mm) 36
Product Length (mm) 457
Product Width (mm) 156
Complete Product Pack Weight (g) 1640
Warranty (Months) - Private Enjoyment Use Only 12
Sold As Single

Amplifier Data


Genuine Useable RMS Power, 4Ohm Bridge (Watts), < 1%THD, 14v 710x1
Genuine Useable RMS Power, 2Ohm Bridge (Watts), < 1%THD, 14v 1300x1
Genuine Useable RMS Power, 1Ohm Bridge (Watts), < 1%THD, 14v 2130x1
Frequency Response (Hz) 10-1000
THD Continuous 4 Ohm 1Khz/100Hz (%) <0.1
Signal To Noise Ratio (db) >96
LPF (Hz) 40-180
Bass Boost (Db) 0-12
Boost Frequency (Hz) 30-80
Subsonic Filter (Hz) 0-50
Audio Signal Input Voltage (V) 0.2-8
LPF Slope (Db/Oct) 12
Subsonic Filter Slope (Db/Oct) 12
Amplifier Topology Class D
Fuse Rating (Amps) 250
Recommended Wiring Kit and Accessories PWK0.1 RCA5.1
Minimum Recommend Final Load Per Channel (Ohms) 1

Extended Amplifier Data


Verified RMS 14.4V Per Channel 4Ohm (Watts)@(THD), (Amps), (Version) 709@1%, 59.6 (V4), 701@1%, 56.4 (V2)
Verified RMS 14.4V Per Channel 2Ohm (Watts)@(THD), (Amps), (Version) 1290@1%, 108.9 (V4), 1242@1%, 101.2 (V2)
Verified RMS 14.4V Per Channel 1Ohm (Watts)@(THD), (Amps), (Version) 2124@1%, 184.5 (V4), 2024@1%, 182.5 (V2)
Verified RMS 13.8V Per Channel 4Ohm (Watts)@(THD), (Amps), (Version) 648@1%, 53.5 (V2)
Verified RMS 13.8V Per Channel 2Ohm (Watts)@(THD), (Amps), (Version) 1142@1%, 95.8 (V2)
Verified RMS 13.8V Per Channel 1Ohm (Watts)@(THD), (Amps), (Version) 1880@1%, 174.6 (V2)
Verified RMS 12.5V Per Channel 4Ohm (Watts)@(THD), (Amps), (Version) 532@1%, 48.7 (V2)
Verified RMS 12.5V Per Channel 2Ohm (Watts)@(THD), (Amps), (Version) 924@1%, 86.7 (V2)
Verified RMS 12.5V Per Channel 1Ohm (Watts)@(THD), (Amps), (Version) 1528@3%, 156.7 (V2)