Close search
  • Home
  • Our Range
  • About Us
  • Distributors
  • News
  • Blog
  • Get in touch
Go to description
Go to description
Go to description
Go to description

DB2.1 2/1 Channel Bridgeable Stereo 12v Power Amplifier 200w Verified RMS Power Output


World RRP: £76.99

Category: AMPLIFIERS

Product code: DB2.1

Now shipping Version 5 of this product - The DB2.1 is a bridgeable 2 channel amplifier endowed with excellent sound control features and advanced protection circuitry. Designed principally for use as a stereo amp to run high powered coaxial or component speakers, it produces a beautifully wide and controlled sound. The amplifier can also be used to run small lightweight subwoofers and offers good performance for its size due to its mono-inspired power supply design, integrated subsonic filter and fully adjustable crossover controls. Also fitted with an RCA line output, the Bassface DB2.1 makes it very easy and convenient to connect from one source RCA, making the addition of extra amplification simple further down the line. The DB2.1 has evolved over almost six years into a sonically excellent, reliable and still very affordable quality automotive amplifier.

Version History


A product that has been in the lineup since the start of the Bassface brand. The DB2.1 was created to be an inexpensive, high quality, reliable amp and it continues to be exactly that. V1 – Exactly what it said on the tin. V2 – The same but production moved to a new location. V3 – Same again...

View extended Version History

A product that has been in the lineup since the start of the Bassface brand. The DB2.1 was created to be an inexpensive, high quality, reliable amp and it continues to be exactly that. V1 – Exactly what it said on the tin. V2 – The same but production moved to a new location. V3 – Same again with improved output by changing a few components. V4 – 2016 styling and black terminal posts. V5 - Assembiles from November 2016. Following analysis in detail the amplifier has undergone improvements. Transformers and inductors are affixed to the PCB using improved adhesive. New output transistors for significant extra power. Reverse polarity connection protection upgraded to improve chances of withstanding a reverse connection. The circuit board has been lifted in the case to align the controls better and a rounded mounting foot has been introduced also to remove sharp edges. Crossover distortion has been reduced due to detail changes on the board. Felt strips have been added under the baseplate to ensure no rattles. V5.1 - Same as V5 but shipped in an attractive outer carton (pictured). Deliveries of this unit expected to begin late Q3 2017 but stock arrived Q2 2017, queued up behind V5.

Hide extended Version History

Series


ASSAULT

Key Facts


Product Category Amplifiers
Version 5.1
Series Assault
Barcode 608938356383
Production Status Current
Product Net Weight (g) (For Pairs/Sets Weight Is All Major Parts) 1940
Product Height (mm) 62
Product Length (mm) 200
Product Width (mm) 242
Complete Product Pack Weight (g) 2100
Retail Carton L (mm) 280
Retail Carton W (mm) 245
Retail Carton H (mm) 98
Warranty (Months) 12
Sold As Single

View extended Key Facts

Amplifier Data


Genuine Useable RMS Power, 4Ohm (Watts), < 1%THD, 14v 80x2
Genuine Useable RMS Power, 2Ohm (Watts), < 1%THD, 14v 100x2
Genuine Useable RMS Power, 4Ohm Bridge (Watts), < 1%THD, 14v 200x1
Frequency Response (Hz) 10-30000
THD Continuous 4 Ohm 1Khz/100Hz (%) <0.05
Signal To Noise Ratio (db) >98
LPF (Hz) 50-250
HPF (Hz) 80-1200
Bass Boost (Db) 0-12
Boost Frequency (Hz) 40
Subsonic Filter (Hz) 20-50
Audio Signal Input Voltage (V) 0.2-6
LPF Slope (Db/Oct) 12
HPF Slope (Db/Oct) 12
Subsonic Filter Slope (Db/Oct) 12
Amplifier Topology Class A/B
Fuse Rating (Amps) 25
Power Wire Input Gauge (AWG) 8
Recommended Wiring Kit and Accessories PWK8.1 RCA5.1
Minimum Recommend Final Load Per Channel (Ohms) 4

View extended Amplifier Data

Extended Amplifier Data


Verified RMS 14.4V Per Channel 4Ohm (Watts)@(THD), (Amps), (Version) 70@0.1% (V5), 59@1%, 14.1 (V4)
Verified RMS 14.4V Per Channel 2Ohm (Watts)@(THD), (Amps), (Version) 95@0.1% (V5), 54@1% (V4)
Verified RMS 14.4V Bridge 4Ohm (Watts)@(THD), (Amps), (Version) 191@0.1% (V5)
Verified RMS 13.8V Per Channel 4Ohm (Watts)@(THD), (Amps), (Version) 54@1%, 13.4 (V4)
Verified RMS 13.8V Per Channel 2Ohm (Watts)@(THD), (Amps), (Version) 51@1%, 18.2 (V4)
Verified RMS 12.5V Per Channel 4Ohm (Watts)@(THD), (Amps), (Version) 46@1%, 12.3 (V4)
Verified RMS 12.5V Per Channel 2Ohm (Watts)@(THD), (Amps), (Version) 44@1%, 16.8 (V4)

View extended Extended Amplifier Data

Technical Highlights


  • Class AB Amplifier
  • K3 Logic Circuit Super Wide 10hz-30khz Range
  • T.D.O.S. Amplifier Protection Circuitry
  • O.P.S. Oversized Power Supply
  • Up To 6V Ready Pre Amp Input Stage
  • Low THD Audiophile Components
  • Cast Aluminium Heatsink Body with rounded edges
  • Thermally Efficient Heatsink Coating
  • Variable Low-Pass Crossover
  • Variable High-Pass Crossover
  • Adjustable Sub Sonic Filter
  • Line Output For Daisy Chain Amplifier Applications
  • Variable Bass Boost Control

What's In The Box?


  • 1 x High Power 2 Channel Amplifier
  • 4 x Self tapping screws
  • 1 x Spare 25A fuse
  • http://incarnav.co.uk/Bassface/DB2.1_2.png
What's In The Box?

Enquire about this product


If you have any questions about this product, complete the form below and we’ll get back to you as soon as we can. Please note that our inbox is extremely busy and at peak times our reply lead time can run into several weeks. Rest assured that we will reply to you in the order that mail is received. Should you require urgent attention please contact one of our distributors for your relevant location.

Fields marked with an * are mandatory