Close search
  • Home
  • Our Range
  • About Us
  • Distributors
  • Get in touch
Go to description
Go to description
Go to description
Go to description
Go to description
Go to description

SPL4C.1 4" 10cm 4OhmComponent Speaker & Tweeter Kit 300w RMS

World RRP: £53.99

Category: Coaxial & Component Speakers

Product code: SPL4C.1

The SPL4C.1 was the next logical progression in the Bassface SPL component speaker family. Sharing common components with its larger counterparts it has a white woven composite cone with excellent stiffness for great midrange and bass response, a silk dome tweeter with a plethora of fitment hardware along with an advanced crossover network whose characteristics have been perfectly matched to the drivers. This combination delivers clear and accurate sound reproduction and good power handling for such a small driver especially when used with a suitable high pass filter and a subwoofer. The back plate is vented to keep the VC compression and temperature down, increasing power handling. The silk dome tweeters are small enough to fit in place of existing ones in your system or to be installed discreetly. The mounting hardware enables you to mount them flush in the dash, on the dash, angled on the dash or even in the doors or headlining. When installed properly into a suitable panel these speakers will instantly improve a factory sound system, revealing the full spectrum of sound that OEM speakers simply cannot reproduce. Team them up with a decent amplifier to experience best resolution and detail – SPL4C.1 might be small but when used correctly they will still produce convincing results with rich smooth midrange and sparkling accurate highs.

Technical Highlights

  • Tech-One White Woven Composite Cone
  • Heavy Gauge Steel Basket
  • Massive Super High Density Ceramic Magnet
  • Multi Layer Aluminium Voice Coil
  • Aerospace Grade Rubber Surround Suspension
  • Highly Musical Silk Dome Tweeter
  • Sibilance Free Bar Type Tweeter Dome Protection
  • 3 Position Tweeter Level Switch -3db / 0db / +3db



What's In The Box?

  • 2 x 4" Mid Bass Drivers
  • 2 x Crossover Unis
  • 2 x 0.75" Silk Dome Tweeters
  • 2 x Tweeter Surface Mounts
  • 2 x Tweeter Flush Mounts
  • Screw Pack With Mounting Hardware
  • 4 x 1m Lengths of Wire With Spade Terminals on 1 End
  • 2 x 3m lengths of Basic Speaker Wire
What's In The Box?

Version History

We built these to cater for those with like elegant style, excellent performance and great value, married with Superb sound and only a 4″ speaker hole in their vehicle. They do that wonderfully with no prototype even made as we just piggy backed existing product specs we had. V1 – The V1 is the first production version.

Key Facts

Product Category Coaxial & Component Speakers
Version 1
Series Classic
First Added 19/08/2016
Last Modified 12/05/2017
Barcode 617529407274
Production Status Discontinued
Product Net Weight (g) (For Pairs/Sets/Major Parts) 1800
Complete Product Pack Weight (g) 2170
Warranty (Months) - Private Enjoyment Use Only 12
Sold As Kit

Related products

Tweeter Data

Overall Depth (mm) 31
Mounting Depth (mm) 16
Front Protrusion From Mounting Plane (mm) 15
Overall Diameter (mm) 56
Installation Cut-out Diameter (mm) 40
System Maximum Power (Watts) (Using Pair Of Tweeters Not Necessarily Included) 200
System RMS (Watts) (Using Pair Of Tweeters Not Necessarily Included) 100
Frequency Response (Hz) 2500-23000
Impedance (Ohm) 4
Sensitivity (db/1Wm) 98

Speaker Data

Speaker Maximum Burst Power (Watts) (One Speaker, Using Appropriate Crossover) 200
Speaker Power Handling RMS (Watts) (One Speaker, Using Appropriate Crossover) 100
Continuous RMS Power (Watts) (One Speaker, Using Appropriate Crossover & 0%THD) 80
Overall Diameter With Lugs (mm) 125
Overall Diameter With Grilles (mm) 140
Overall Diameter (mm) 100
Magnet Diameter (mm) (Including Magnet Protector Where Applicable) 75
Installation Cut-Out Diameter (mm) 90
Grille Depth (mm) 20
Overall Depth (mm) 48
Mounting Depth (mm) 45
Front Protrusion From Mounting Plane (mm) 3
System Frequency Response (Hz) 53-23000
Impedance (Ohm) (Nominal) 4
Sensitivity (db/1Wm) 95

System Power

Full System Power Handling RMS (Watts) (Using Pair/Full Set Of Speakers Not Necessarily Included & Appropriate Crossover) 300