Close search
  • Home
  • Our Range
  • About Us
  • Distributors
  • News
  • Blog
  • Get in touch
Go to description
Go to description
Go to description
Go to description
Go to description
Go to description

SPLT.2 3" 89mm 4Ohm Bullet Tweeter Single 175w RMS


World RRP: £29.99

Category: Tweeters & Horns

Product code: SPLT.2

Now shipping Version 3 of this product - Our Third generation of bullet tweeter. Same performance with a more efficient magnet and now is even better looking than its predecessor! The SPLT.2 is a pure thoroughbred performance product. Designed with pro audio and pro SPL customers in mind, this tweeter will wipe the floor with comparative products from the off. It has a massive cast enclosed motor and extended Tractrix horn throat for increased directivity and more even frequency response. These bad boys can handle a massive 350w Maximum each! (175w RMS at frequencies at or above 5khz.) The precision machined throat and bullet further aid a smooth and crisp output whilst also making this tweeter look as terrific as it sounds – something worth showing off as opposed to trying to hide behind cloth or grilles! Suitable for both pro and automotive applications this is one highly sensitive, highly powerful and highly desirable tweeter drive unit. In keeping with our philosophy of supporting clients we are also pleased to announce the availability of the SPLT.2RC recone kit which enables customers to repair burned out units. Now shipping with pre fitted 3.3uF capacitors for easy installation. Note that these capcitors will ensure a safe installation in every case but that they can be removed for use in an active system or be replaced by other capacitors as long as the drive frequency is taken into account to prevent damage. We suggest trying 8 or 9uF capacitors (not supplied) as an alternative if you are interested in experimentation.

Version History


Prototype – We created the SPLT.2 to be a higher power, higher quality, all round more sexy version of the SPLT.1. It excelled in most but the much higher power field so we went ahead and put it into production. V1 – The V1 is a great piece of audio construction it feels as good as it looks. And...

View extended Version History

Prototype – We created the SPLT.2 to be a higher power, higher quality, all round more sexy version of the SPLT.1. It excelled in most but the much higher power field so we went ahead and put it into production. V1 – The V1 is a great piece of audio construction it feels as good as it looks. And we think it looks amazing. This signed is very smooth and clear although it can be very bright and is very revealing of poor quality amplifiers. No major issues were encountered with design or manufacture. However we have noted some requirements and changes that needed to be made to make a better product in the V2. V2 – The V2 features ready attached capacitor crossovers and shorter terminals so as to make fitment a little bit more convenient. Rated power shunted down slightly to reflect real world testing.. V3 – Bassface logo added to front panel. Revised outer pack, revised magnet. Smoother paint finish. Posidrive screws converted to allen style bolts.

Hide extended Version History

Series


HAMMER

Key Facts


Product Category Tweeters & Horns
Version 3
Series Hammer
Barcode 617529407328
Production Status Current
Product Net Weight (g) (For Pairs/Sets Weight Is All Major Parts) 580
Complete Product Pack Weight (g) 720
Retail Carton L (mm) 105
Retail Carton W (mm) 85
Retail Carton H (mm) 75
Warranty (Months) 12
Sold As Single

View extended Key Facts

Tweeter Data


Recommended Cable PSC18.1
Voice Coil Diameter (mm) 25
Overall Depth (mm) 60
Mounting Depth (mm) 50
Front Protrusion From Mounting Plane (mm) 10
Overall Diameter (mm) 89
Magnet Diameter (mm) 70
Installation Cutout Diameter (mm) 72
System Maximum Power (Watts) (Using Pair Of Tweeters Not Necessarily Included) 700
System RMS (Watts) (Using Pair Of Tweeters Not Necessarily Included) 350
System Maximum Power (Watts) (Single Tweeter) 350
System RMS (Watts) (Single Tweeter) 175
Frequency Response (Hz) 3000-23000
Impedance (Ohm) 4
Sensitivity (db/1Wm) 106

View extended Tweeter Data

System Power


Full Speaker System Recommended Peak Power Input (Watts) (Using Pair/Full Set Of Speakers Not Necessarily Included & Appropriate Crossover) 400 (5Khz High Pass)
Full Speaker System Power Handling RMS (Watts) (Using Pair/Full Set Of Speakers Not Necessarily Included & Appropriate Crossover) 200 (5Khz High Pass)

Technical Highlights


  • One Piece Solid Cast Alloy Chassis Enclosed Motor
  • Pure Titanium Diaphragm
  • OFC Copper Voice Coil
  • Pro Audio Inspired Features For Extreme SPL
  • Extended Throat For Better Directivity
  • Extra Wide Frequency Range
  • Suggested Passive Crossover - 2.2uF 400v Polypropylene Film Capacitor (approx 9khz 6db/oct)
  • Spade Terminals And Pre Installed 3.3uF Capacitor

What's In The Box?


  • 1 x High Power Pro Bullet Tweeter
  • 1 x Bass Blocker Capacitor Crossovers (Pre Fitted)

Enquire about this product


If you have any questions about this product, complete the form below and we’ll get back to you as soon as we can. Please note that our inbox is extremely busy and at peak times our reply lead time can run into several weeks. Rest assured that we will reply to you in the order that mail is received. Should you require urgent attention please contact one of our distributors for your relevant location.

Fields marked with an * are mandatory