Close search
  • Home
  • Our Range
  • About Us
  • Distributors
  • Get in touch
Go to description
Go to description
Go to description
Go to description
Go to description
Go to description
Go to description

XDB1.1FR 1Ohm Class D Monoblock Full Range 12v Power Amplifier 2470w Verified RMS Power Output


World RRP: £284.99

Category: AMPLIFIERS

Product code: XDB1.1FR

Bassface is an international brand. That means that we have a sense of the trends within our field in a very broad sense. At the moment, in the Americas and some of Europe there is a huge excitement around building big, powerful amplifiers that use a Class D architecture but that are set to run full range. They are being used to drive all manner of incredible and wonderful speaker systems that are often crafted in a very exciting way. We wanted to be part of this and so we are proud to introduce to you the XDB1.1FR. This amplifier has an advanced double sided PCB with a circuit drawn by one of the most respected designers in the industry and the amplfier has a compelling set of performance credentials. The ability to run loads down as low as 1 ohm conservatively is of course the main party trick, but one could just as easily use the XDB1.1FR throttled back on a more modest load to create a system with huge reserves of power and headroom. XDB1.1FR also debuts a brand new remote control that has voltage, temperature display and a clip light along with its bass level control. On the connections we have huge, high quality insulated terminals with a useful remote out to drive other amps.

Version History


As a spin off from the Q2 meeting with our Chinese engineers the XDB1.1FR project was actually easier than we expected because the design was a clean sheet affair. The V1 amplifier has exceeded expectations right away and was delivered to our warehouse Q3 2017, in excellent time and customer deliveries will begin right away. V1.1 - Production models have had their safe impedance for customer use altered to 1 ohm after testing, for safety. Performance at 1 ohm is outstanding with almost 2500WRMS at only 1% distortion. Now discontinued. Support ended Q3 2022.

Series


Hammer

Key Facts


Product Category Amplifiers
Version 1
Series Hammer
Date Added 29/03/2017
Date Modified 09/03/2020
Barcode 683422302107
Production Status Discontinued
Product Net Weight (g) (For Pairs/Sets/Major Parts) 5935
Product Height (mm) 65
Product Length (mm) 420
Product Width (mm) 255
Complete Product Pack Weight (g) 6731
Retail Carton L (mm) 530
Retail Carton W (mm) 300
Retail Carton H (mm) 110
Warranty (Months) - Private Enjoyment Use Only 12
Sold As Single

Amplifier Data


Genuine Useable RMS Power, 4Ohm Bridge (Watts), < 1%THD, 14v 830x1
Genuine Useable RMS Power, 2Ohm Bridge (Watts), < 1%THD, 14v 1570x1
Genuine Useable RMS Power, 1Ohm Bridge (Watts), < 1%THD, 14v 2470x1
Frequency Response (Hz) 10-10000
Signal To Noise Ratio (db) >95
LPF (Hz) 35-10000
HPF (Hz) 10-1000
Bass Boost (Db) 0-9
Audio Signal Input Voltage (V) 0.2-6
LPF Slope (Db/Oct) 12
HPF Slope (Db/Oct) 12
Amplifier Topology Class D
Fuse Rating (Amps) 280
Recommended Wiring Kit and Accessories PWK0.1 RCA5.1
Minimum Recommend Final Load Per Channel (Ohms) 0.5

Extended Amplifier Data


Verified RMS 14.4V Per Channel 4Ohm (Watts)@(THD), (Amps), (Version) 829@1%,66.8(V1)
Verified RMS 14.4V Per Channel 2Ohm (Watts)@(THD), (Amps), (Version) 1561@1%,137.2(V1)
Verified RMS 14.4V Per Channel 1Ohm (Watts)@(THD), (Amps), (Version) 2467@1%,110.3(V1)
Verified RMS 13.8V Per Channel 4Ohm (Watts)@(THD), (Amps), (Version) 831@1%,67.6(V1)
Verified RMS 13.8V Per Channel 2Ohm (Watts)@(THD), (Amps), (Version) 1460@1%,128.8(V1)
Verified RMS 13.8V Per Channel 1Ohm (Watts)@(THD), (Amps), (Version) 2229@1%,220.9(V1)
Verified RMS 12.5V Per Channel 4Ohm (Watts)@(THD), (Amps), (Version) 754@1%,66.7(V1)
Verified RMS 12.5V Per Channel 2Ohm (Watts)@(THD), (Amps), (Version) 1224@1%,117.7(V1)
Verified RMS 12.5V Per Channel 1Ohm (Watts)@(THD), (Amps), (Version) 1835@1%,199.1(V1)

Related products


Technical Highlights


  • Bespoke Full Range Class D Mono Amplifier
  • Incredible Power - Fantastic Value Per Watt
  • Remote control with voltage and temperature display and clip light
  • Highly Efficient Class D Topology
  • Load Optimised for Transient Stability at Low Impedance's
  • T.D.O.S. Amplifier Protection Circuitry
  • O.P.S. Oversized Power Supply
  • Up To 6V Ready Pre Amp Input Stage
  • Low THD Audiophile Components
  • Variable Phase 0-180 Degrees
  • High Density Cast Aluminium Heatsink Body
  • Thermally Efficient Heatsink Coating
  • Variable Bass Boost
  • Variable Crossover
  • Remote Out Feed

What's In The Box?


  • 1 x High Performance Mono Amplifier
  • 1 x Bass remote level control
  • 1 x 5m level control cable
  • 1 x Accessory Pack
What's In The Box?